OBS Screen Recording: 7 Settings Beginners Get Wrong

Quick answer

The seven settings that ruin most beginner OBS recordings are: recording to MP4 instead of MKV, using CBR rate control instead of CQP/CRF, picking the Lossless preset, leaving output resolution and downscale filter at defaults, recording at 60fps when 30 is enough, leaving audio at 44.1 kHz instead of 48 kHz, and capturing the whole display instead of the window you actually need. None of these are hard to fix. The whole list takes about four minutes in Settings → Output and Settings → Video, and it is the difference between a 3.6 GB file that opens and a 0-byte file that does not.

OBS Studio is genuinely one of the better free tools on a desktop — it records, streams, and runs on Windows 10 and 11, macOS 13 or newer, and Linux, with no watermark and no paid tier. The catch is that it ships pointed at streaming, not at local recording. So the defaults you get are the defaults a Twitch streamer would want, and if you are just trying to record a tutorial, a bug report, or a lecture, five of those defaults are actively working against you.

I have recorded with OBS for a while and made most of these mistakes myself, including the one that cost me a forty-minute recording. Here is the short list, in the order I would fix them.

Before you start: use the Auto-Configuration Wizard once

If you have never opened Settings, run Tools → Auto-Configuration Wizard first. It appears on first launch, and you can run it any time from the Tools menu. Choose Optimize just for recording, I will not be streaming rather than the streaming option — that single choice changes which defaults the rest of this article is relative to. The wizard also sets a sensible base resolution and encoder for your hardware, which saves you from debugging both at once.

Everything below assumes you have done that, or that you are willing to touch Settings manually. Two pages matter: Settings → Output for how the file is encoded, and Settings → Video for how the frame is built.

1. Should you record straight to MP4?

This is the one that actually destroys work. MP4 keeps its index — the table that tells a video player where each frame lives — at the end of the file. If OBS crashes, the machine loses power, or you force-quit the app, that index is never written and the video is unreadable. You get a file with a plausible size that no player will open.

MKV writes frame data as it goes, so an interrupted recording is still recoverable. Record to MKV and convert after the fact.

What to set: Settings → Output → Recording → Recording Format: Matroska (.mkv). Recent OBS versions also include an Automatically remux to MP4 switch (its exact menu location has moved between versions), which converts the finished file to MP4 for you on stop. If your version does not have it, use File → Remux Recordings after you stop — it rewraps the container without re-encoding, so it takes seconds and loses no quality.

The workflow that never loses a file: record MKV, remux to MP4 when it is done, delete the MKV once the MP4 opens correctly.

2. Why is CBR the wrong rate control for a recording?

CBR — constant bitrate — exists because a streaming server needs a predictable feed. It spends the same number of bits per second on a static spreadsheet as on a fast-scrolling game, which means it wastes space on the easy parts and still looks bad on the hard parts.

Local recordings do not have that constraint. You want quality-based rate control, which spends bits where they are needed and compresses the rest.

What to set: Settings → Output → Output Mode: Advanced → Recording tab → Rate Control:

If you are on Simple output mode and do not want to leave it, that is fine — Simple mode's quality presets are also quality-based. The mistake to avoid there is the next item.

3. Is the Lossless preset ever worth it?

In Simple mode the recording quality list reads, roughly: Stream, High Quality, Medium File Size, Indistinguishable Quality, Large File Size, and Lossless. The word "Lossless" sounds like the correct choice for archiving, and it is — for a ten-second clip. For a hour-long screen recording it produces enormous files, often tens of gigabytes, and it will fill a laptop drive mid-session.

What to set: Indistinguishable Quality, Large File Size. For screen content — text, UI, documents — that preset is effectively transparent; you will not see the difference against Lossless, but you will see the difference in free disk space. Reserve Lossless for short captures you intend to re-encode or grade.

4. What should your output resolution and downscale filter be?

Two resolution numbers live in Settings → Video: Base (Canvas) Resolution, which is the size of your scene, and Output (Scaled) Resolution, which is the size of the file. If the output is smaller than the base, OBS scales the image down using a filter, and the default filter is not the best one for text.

What to set: For a straight screen recording, make Output equal to Base — no scaling, no filter, no softness. If you deliberately want a smaller file, set Output to your target (1920×1080 is the usual choice) and change Downscale Filter to Lanczos. Lanczos keeps small text and UI edges noticeably crisper than the default Bicubic, which is tuned for photographic content, not screenshots of a menu bar.

5. Do you actually need 60fps for a screen recording?

Doubling the frame rate roughly doubles the work the encoder has to do and, at a fixed bitrate, halves the bits available to each frame. For gameplay and fast cursor motion, 60fps is worth it. For a tutorial, a code walkthrough, or a recorded meeting, it is not: the content barely changes between frames, so you pay twice for almost nothing.

What to set: Settings → Video → Common FPS Values: 30 for screen content, 60 only if the recording is dominated by motion. If you are dropping frames while recording at 60, dropping to 30 is usually the fastest fix available.

6. Why does 44.1 kHz audio cause problems later?

44.1 kHz is the CD standard; 48 kHz is the standard for video. Mismatched sample rates force a resample somewhere down the line, and the audible result is usually a slight drift or a pitch artifact if you later edit the audio in a video editor.

What to set: Settings → Audio → Sample Rate: 48 kHz. While you are on that page, check that Desktop Audio and your microphone are pointed at the devices you think they are — on a laptop with a dock or a USB headset, OBS will happily capture the wrong device and you will not notice until playback. Also consider recording the mic and the desktop sound on separate audio tracks (Settings → Output → Advanced → Audio Track), which lets you fix one without muting the other in post.

7. Should you capture the whole display or one window?

Display Capture grabs everything on the monitor: your notifications, your chat window, a password manager that happened to be open, and the second monitor's wallpaper bleeding into a laptop recording. It also breaks when a display is disconnected, the resolution changes, or a remote session resizes it. Window Capture follows one window and nothing else.

What to set: Add a Window Capture source and pick the target window, rather than adding Display Capture. On Windows 10 1903 and newer, open the source properties and set Capture Method to Windows Graphics Capture — it renders hardware-accelerated windows that the older method turns into a black rectangle. If the target window has a fixed size, also enable Allow Transparency only when you need it; otherwise leave it off.

Two desktop-level habits worth having: hide the taskbar and desktop icons before a long recording, and turn off notification pop-ups. Nothing ends a tutorial video faster than a message preview sliding into frame.

All seven settings, in one table

#SettingCommon beginner valueUse insteadWhy it matters
1Recording formatMP4MKV (+ auto remux to MP4)A crash during MP4 recording leaves an unreadable file; MKV is recoverable
2Rate controlCBRCQP / CRF 18–23CBR is for streaming; quality-based control spends bits where the image needs them
3Quality preset (Simple mode)LosslessIndistinguishable QualityLossless produces tens of GB per hour for no visible gain on screen content
4Resolution & downscale filterScaled output, BicubicOutput = Base, or Lanczos if scalingBicubic softens text; Lanczos keeps UI edges sharp
5Frame rate60fps always30fps for screen contentDouble the encoding cost for content that barely changes between frames
6Audio sample rate44.1 kHz48 kHz48 kHz is the video standard; avoids resampling drift in editors
7Capture sourceDisplay CaptureWindow Capture + Windows Graphics CaptureNo leaks of notifications or other windows, and no black screen on accelerated apps

And the file-size arithmetic, since it comes up every time someone plans a long recording. With a fixed bitrate, size is roughly bitrate × 3600 ÷ 8 megabytes per hour:

Bitrate (CBR)1080p, 1 hour1080p, 3 hours
4 Mbps~1.8 GB~5.4 GB
8 Mbps~3.6 GB~10.8 GB
12 Mbps~5.4 GB~16.2 GB
20 Mbps~9.0 GB~27 GB

With CQP or CRF those numbers are an upper bound, not a prediction: a recording of a document or a code editor compresses far below a bitrate table like this, while a recording of a scrolling video feed gets close to it. Plan on the higher number and you will not run out of space halfway through.

Our position: OBS is the right tool for this, and it is free — GPLv2, no watermark, no upgrade nag, and explicitly usable commercially without restriction. What it is not is pre-configured for local screen recording. Four minutes in Settings → Output and Settings → Video, plus recording to MKV instead of MP4, will save you more time than any paid screen recorder would.

How We Put This Together

Version, platform support and licensing details were checked directly on the OBS Project's official site in November 2026: the current release is OBS Studio 33.0.1, published October 29th, supporting Windows 10 and 11, macOS 13.0 or newer, and Linux via Flathub or the official Ubuntu PPA. The free/commercial-use statement, the recommendation to use Simple mode presets and hardware encoders for recording, and the Auto-Configuration Wizard's location in the Tools menu all come from the OBS Project's own help portal and Quick Start Guide. The setting names and menu paths below reflect OBS's current interface; a few options have moved between versions, so if a name is not where this article says, look for it on the adjacent settings page before assuming it is missing. File-size figures are arithmetic from the bitrate formula, not measured output from a specific machine, and actual sizes vary with content.

Frequently asked questions

Is OBS Studio really free for recording?

Yes. It is open source under GPLv2, with no watermark, no time limit, no ads, and no paid tier. The OBS Project states it can be used commercially with no restrictions. Anything that asks you to pay for OBS is a scam — request a refund or a chargeback.

Why is my recording a 0-byte file, or one that won't open?

Usually because you recorded to MP4 and the session was interrupted. MP4 writes its index at the end of the file, so a crash leaves nothing to read. Record to MKV instead: it is salvageable after a crash. If you already have a broken MKV or need MP4 for sharing, use File → Remux Recordings, which rewraps the file without re-encoding.

Why is my OBS recording a black screen?

Four usual suspects, in order: you are capturing a hardware-accelerated window with the older capture method (switch to Windows Graphics Capture on Windows 10 1903+); the laptop has switchable graphics and OBS is running on the integrated GPU (force it to the discrete GPU); OBS needs elevated permissions for some windows (run as administrator); or the GPU driver is out of date. Try Window Capture before Display Capture — it sidesteps most of these.

What bitrate should I use for local recording?

Ideally none — use CQP (hardware encoders) or CRF (x264) around 18–23 and let the encoder decide. A fixed CBR bitrate is a streaming requirement; for recording it either wastes space or produces blocking. If you have a reason to use CBR anyway, 8–12 Mbps is a reasonable 1080p range.

How long can OBS record, and how much disk space do I need?

There is no time limit in OBS; the limit is free disk space. At a fixed bitrate, budget roughly bitrate × 3600 ÷ 8 MB per hour — 8 Mbps is about 3.6 GB per hour, 12 Mbps about 5.4 GB. With quality-based control, document and code recordings come in well under those figures and motion-heavy recordings close to them.

Next: if you are assembling a free toolkit, see our roundup of free tools that replace paid apps, or the ShareX vs Snipping Tool comparison for screenshot and GIF capture. Recording is only half the job — for shrinking the output before you upload it, our 7-Zip guide covers free compression that actually works.

Get more guides like this

Free tools, VPNs and realistic side income — tested hands-on, delivered weekly.

Subscribe free